National Instruments GPIB-ENET/1000
Device Information
| Family: | interface [ other interface devices ] |
| Interface: | ethernet |
| Vendor: | National Instruments [ vendor info ] |
| More info: | spec help: nigpib, gpib Vendor: www.ni.com |
| Platform: | all |
| Configuration: |
edconf editor:Interface Configuration GPIB DEVICE ADDR <>MODE <>TYPE 0 YES 0x2b8 Nat Inst PCII (built-in) 0 YES 0x2e0 Nat Inst PCIIA (built-in) 0 YES 0x2c0 Nat Inst AT-GPIB (built-in) 0 YES 1:3 Nat Inst PCI-GPIB (built-in) 0 YES 0x2100 Nat Inst VME-GPIB (built-in) 0 YES host Nat Inst GPIB-ENET (built-in) |
Notes:
As of spec release 5.07.02-6, built-in support for the AT-GPIB and PCI-GPIB cards is included. As of release 5.07.02-4, support for GPIB-ENET/10, GPIB-ENET/100 is included No additional drivers or vendor libraries are required. For older spec releases and 2.4 or earlier Linux kernels, GPIB drivers for the AT, PCI and ENET cards are available from National Instruments at ftp.ni.com. However, the newer version 2 drivers (needed for 2.6 Linux kernels) are not supported by spec. Use the Source Forge driver instead.